Sans Digital iSCSI STORAGE Uživatelský manuál Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 86
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
3.3 System Control
3.3.1 LCM (SL5650)
Use the four function keys, (Up), (Down), ESC (Escape) and ENT (Enter) to control LCM (LCD
Control Module). After booting up the system, the following screen will be displayed.
After pressing ENT (Enter) key, you can use (Up) and (Down) keys to select a LCM function.
If there is any alarm or error message, LCM will show the related information on the screen to provide
users with more information.
Each LCM function is described as follows:
Alarm Mute To turn off the alarm sound when an error occurs
Reset/Shutdown To reset or shutdown the controller
Quick Install
To use “Quick Install” to set up a volume by three steps. Please refer to section 4.3 for con gure via the web-
based GUI
View IP Setting To view current IP address, subnet mask and gateway
Change IP Con g
To set up the IP address, subnet mask and gateway. You can choose to use DHCP server (for IP address
allocation) or manually specify the IP address
Reset to Default
To restore factory defaults:
Default Password: 1234
Default IP address: 192.168.0.1
Default subnet mask: 255.255.255.0
Default gateway: 192.168.0.254
xxx.xxx.xxx.xxx
IntelliRAID
22 RAID Introduction
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 85 86

Komentáře k této Příručce

Žádné komentáře